How to Turn the Lights On?

[BigE79]

Just starting my first print now with the UP300. Auto-calibration seems to have worked well, but I adjusted one corner because it was way out (0.76mm)
just printing the model calibration part and it's going okay but the light is not on. Does anyone know how to turn the case light on when printing? only button on the LCD is pause. Light works okay with the door open but I don't want to have to open the door to see what's happening.

[TiertimeBrook]

You can try tapping the screen twice or more to light up the light with the door closed.

[BigE79]

Ah yes, tapping the screen seems to work. Would be good if there was an icon for this as there's only the pause button and I was afraid to accidentally pause the print. Now that I know it's not a problem I guess.

Thanks.